METER AND GAUGES — Tachometer, Temp. and Fuel Gauges / Wiring Diagram
EL-58wiring diagramPin numbers transcribed from the meter rear-view on EL-57.
Tachometer, Temp. and Fuel Gauges / Wiring Diagram
Tachometer / temp gauge / fuel gauge / speedometer wiring
Components (21)
BatteryIgnition switch (ON or START)Fuse block (10 A)Combination meter (pins 6, 7, 10, 12, 13, 19, 24, 26, 28 used here)E.C.C.S. control unit (refer to EF & EC) — terminal 53 Y/G drives tachThermal transmitter (engine — temp sender)Fuel-tank gauge unitSpeed sensorA/T control unitS.M.J. (foldout)Differential oil cooler relay-1 (PD section)Body grounds (M125 / M101 / M116 / M117 / M57)eccs ctrl (term 53)comb meter pin 12 (tachometer)comb meter pin 26 (temp gauge)thermal xmtr (return)comb meter pin 10comb meter pin 24 (fuel gauge)fuel tank gauge (gnd)comb meter pin 19comb meter pin 6 (electric speedometer)
Connections (6)
eccs ctrl (term 53)
eccs ctrl (term 53)comb meter pin 12 (tachometer)Yellow with Green stripe
Thermal transmitter (engine — temp sender)
Thermal transmitter (engine — temp sender)comb meter pin 26 (temp gauge)Yellow with Green stripe
thermal xmtr (return)
thermal xmtr (return)comb meter pin 10Blue with Black stripe
Fuel-tank gauge unit
Fuel-tank gauge unitcomb meter pin 24 (fuel gauge)Yellow with Black stripe
fuel tank gauge (gnd)
fuel tank gauge (gnd)comb meter pin 19Black
Speed sensor
Speed sensorcomb meter pin 6 (electric speedometer)Yellow with Blue/Black stripe
NOTE
(A) = A/T, (M) = M/T, (L)/(R) drive variants. Speed sensor on the gearbox feeds both the meter and the differential-oil-cooler relay-1 in PD section.