BATTERY — Battery Test and Charging Chart (Cont'd) — A: SLOW CHARGE

EL-14flowchart

Initial charging-current table conflates pairs of battery types per row (e.g. 28B19/34B19) since the initial-current value is identical.

Continued from EL-13

Battery Test and Charging Chart (Cont'd)

A: SLOW CHARGE

Slow charge — procedure flow

Determine initial charging current from specific gravity referring to Fig. 2.

Charge battery. Check charging voltage 30 minutes after starting the battery charge.

Below 12 volts or above 15 volts

12 to 15 volts

O.K.

Continue to charge for 12 hours.

CHECKING SPECIFIC GRAVITY. Refer to "Specific Gravity Check".

Conduct additional charge as per Fig 3, if necessary.

Go to "CAPACITY TEST".

Fig. 2 — Initial charging current setting (Slow charge)

Battery type	Converted SG below 1.100 — Initial charging current (A)
28B19R(L) / 34B19R(L)	4.0
46B24R(L) / 55B24R(L)	5.0
50D23R(L) / 55D23R(L)	7.0
65D26R(L) / 80D26R(L)	8.0
75D31R(L)	9.0
95D31R(L) / 95E41R(L)	10.0
130E41R(L)	14.0

28B19R(L) / 34B19R(L)

Converted SG below 1.100 — Initial charging current (A)4.0

46B24R(L) / 55B24R(L)

Converted SG below 1.100 — Initial charging current (A)5.0

50D23R(L) / 55D23R(L)

Converted SG below 1.100 — Initial charging current (A)7.0

65D26R(L) / 80D26R(L)

Converted SG below 1.100 — Initial charging current (A)8.0

75D31R(L)

Converted SG below 1.100 — Initial charging current (A)9.0

95D31R(L) / 95E41R(L)

Converted SG below 1.100 — Initial charging current (A)10.0

130E41R(L)

Converted SG below 1.100 — Initial charging current (A)14.0

NOTE

Check battery type and determine the specified current using the table shown above. After starting charging, adjustment of charging current is not necessary.

Fig. 3 — Additional charge (Slow charge) by current SG band

Rendering diagram…

WARNING

CAUTION: a. Set charging current to value specified in Fig. 2. If charger is not capable of producing specified current value, set its charging current as close to that value as possible. b. Keep battery away from open flame while it is being charged. c. When connecting charger, connect leads first, then turn on charger. Do not turn on charger first, as this may cause a spark. d. If battery temperature rises above 60 °C (140 °F), stop charging. Always charge battery when its temperature is below 60 °C (140 °F).

Support our work!