HEADLAMP — Description (Cont'd) — Circuit Operation [A]: 1ST → 2ND
EL-40wiring diagramTwo-step circuit-flow illustration; current paths highlighted in heavy line on the source image.
Description (Cont'd)
CIRCUIT OPERATION
[A] When lighting switch is switched from "1ST" → "2ND"
NOTE
A-1: While operating the headlamp motor to open position. Battery → fuse → retractor switch and retract-relay set energise both headlamp motors via the DETECTING switch in the DOWN-to-UP travel; headlamps still off. (See fig1.)
A-2: After the headlamp motor reaches fully open position. The DETECTING switch closes UP and the lighting-switch 2ND output drives both headlamp filaments; motor circuit returns to standby. (See fig2.)