Nissan 200SX S13 silhouetteS13

SERVICE DATA AND SPECIFICATIONS (S.D.S.)

EF & EC-136spec table

Idle speed and idle speed with A/C ON values differ between M/T and A/T models. Ignition timing (B.T.D.C.) applies to both M/T and A/T at 15°±2°.

General Specifications

PRESSURE REGULATOR — Regulated pressure
250.1 (2.501, 2.55, 36.3)kPa (bar, kg/cm², psi)

Inspection and Adjustment

AIR FLOW METER — Output voltage
1.0 - 3.0V
ENGINE TEMPERATURE SENSOR — Thermistor resistance at 20°C (68°F)at 20°C (68°F)
Approx. 2.5
ENGINE TEMPERATURE SENSOR — Thermistor resistance at 80°C (176°F)at 80°C (176°F)
Approx. 0.3
THROTTLE VALVE SWITCH — Engine speed when idle switch is changed from "OFF" to "ON"
Idle speed + 250±150rpm
FUEL PRESSURE — At idleAt idle
196 (1.96, 2.0, 28)kPa (bar, kg/cm², psi)
FUEL INJECTOR — Coil resistance
2 - 3Ω
IDLE SPEED — M/T modelM/T model
850±50rpm
IDLE SPEED — A/T model in "N" positionA/T model in "N" position
850±50rpm
IDLE SPEED (A/C ON) — M/T modelM/T model, A/C ON
950±50rpm
IDLE SPEED (A/C ON) — A/T model in "N" positionA/T model in "N" position, A/C ON
900±50rpm
IGNITION TIMING (B.T.D.C.) — M/TM/T
15°±2°
IGNITION TIMING (B.T.D.C.) — A/TA/T
15°±2°
IDLE CO
Idle mixture is preset at factory.%
AIR REGULATOR
Approx. 70Ω
IGNITION COIL — Primary resistance at 20°C (68°F)at 20°C (68°F)
0.6 - 0.8Ω
IGNITION COIL — Secondary resistance at 20°C (68°F)at 20°C (68°F)
6 - 8

Search Manual

Search pages, specs, and procedures