ENGINE REMOVAL
EM-32prose procedureWARNING
- 1Situate vehicle on a flat and solid surface.
- 2Place chocks at front and back of rear wheels.
- 3Do not remove engine until exhaust system has completely cooled off. Otherwise, you may burn yourself and/or fire may break out in fuel line.
- 4For safety during subsequent steps, the tension of wires should be slackened against the engine.
- 5Before disconnecting fuel hose, release fuel pressure from fuel line. Refer to "Releasing Fuel Pressure" in section EF & EC.
- 6Be sure to hoist engine and transmission in a safe manner.
- 7For engines not equipped with engine slingers, attach proper slingers and bolts described in PARTS CATALOG.
CAUTION
CAUTION:
• When lifting engine, be careful not to strike adjacent parts, especially accelerator wire casing, brake lines, and brake master cylinder.
• In hoisting the engine, always use engine slingers in a safe manner.
• Do not loosen front engine mounting insulator cover securing nuts. When cover is removed, damper oil flows out and mounting insulator will not function. For tightening torque, refer to sections AT, MT and PD.