SERVICE DATA AND SPECIFICATIONS (S.D.S.) — Inspection and Adjustment
RA-25spec tableInspection and Adjustment
WHEEL ALIGNMENT (Unladen*)
| Specification | Value |
|---|---|
| CamberUnladen* | -1°40' to -0°40'degree |
| Toe-in (length)Unladen* | 0 - 5mm (0 - 0.20 in) |
| Toe-in (Total)Unladen* | 0' - 28'degree |
CamberUnladen*
-1°40' to -0°40'degree
Toe-in (length)Unladen*
0 - 5mm (0 - 0.20 in)
Toe-in (Total)Unladen*
0' - 28'degree
NOTE
* Tankful of fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools, mats in designated position.
WHEEL BEARING
| Specification | Value |
|---|---|
| Wheel bearing axial end play | 0.05mm (0.0020 in) or less |
| Wheel bearing lock nut | ≈2305 - 3079N·m |
Wheel bearing axial end play
0.05mm (0.0020 in) or less
Wheel bearing lock nut
2305 - 3079N·m
WHEEL RUNOUT (Radial and lateral)
Wheel runout limits by wheel type
Aluminum wheel
Radial runout (mm/in)0.3 (0.012) or less
Lateral runout (mm/in)0.3 (0.012) or less
Steel wheel
Radial runout (mm/in)0.5 (0.020) or less
Lateral runout (mm/in)0.8 (0.031) or less
Aluminum-wheel row spans both runout columns in the source (single combined value 0.3 or less for both). Steel-wheel row has separate radial and lateral limits.
LOWER BALL JOINT
| Specification | Value |
|---|---|
| Swing forceMeasuring point: cotter pin hole of ball stud. | 12.7 - 90.2N (1.3 - 9.2 kg, 2.9 - 20.3 lb) |
| Turning | ≈4.9 - 33N·m |
| Vertical end play | 0mm (0 in) |
Swing forceMeasuring point: cotter pin hole of ball stud.
12.7 - 90.2N (1.3 - 9.2 kg, 2.9 - 20.3 lb)
Turning
4.9 - 33N·m
Vertical end play
0mm (0 in)