PARKING DRUM BRAKE (DS17HD) — Breaking In, Drum Inspection
BR-31prose procedurePARKING DRUM BRAKE (DS17HD) — Rear Disc Brake AD9 Model
Breaking in Drum and Lining
Drum and lining break-in procedure
- 1Using either low or 2nd transmission speed, drive the unloaded vehicle at approximately 30 km/h (19 MPH) on a safe, level and dry road.
- 2Depress the release button of parking brake lever, then pull the lever with a force of 98 N (10 kg, 22 lb).
- 3While holding the lever back, continue to drive the vehicle 100 m (328 ft).
- 4Repeat steps 1 through 3 two or three times.
Drum Inspection
| Specification | Value |
|---|---|
| Standard inner diameter | 172.0mm (6.77 in) |
| Maximum inner diameterReplace drum / rotor above this value. | 173.0mm (6.81 in) |
| Radial runout (Total indicator reading) | 0.07mm (0.0028 in) |
Standard inner diameter
172.0mm (6.77 in)
Maximum inner diameterReplace drum / rotor above this value.
173.0mm (6.81 in)
Radial runout (Total indicator reading)
0.07mm (0.0028 in)