PARKING BRAKE CONTROL — Removal and Installation, Inspection

BR-28parts diagram

Removal and Installation

Before removing parking brake control, remove console box.

Loosen cable using control lever adjuster, and separate front and rear cables.

Break clinched portion of control lever using a hammer and chisel as shown in figure at left, and replace cables with new parts.

IMPORTANT

Apply multi-purpose grease to areas between control lever drum and cables.

CAUTION

Be careful not to damage boot and inner cable.

IMPORTANT

When installing parking brake cable at rear caliper, make sure to align matchmark on parking cable stay and cable.

1
Check control lever for wear or other damage. Replace if necessary.
2
Check parking brake cables, lamp and switch. Replace if necessary.
3
Check parts at each connecting portion for deformation or damage. If found, replace.