Hydraulic Clutch Control — Clutch Master Cylinder (Cont'd) & Operating Cylinder
CL-7prose procedureClutch Master Cylinder (Cont'd)
INSPECTION
Clutch Master Cylinder Inspection
- 1Check cylinder and piston rubbing surface for uneven wear, rust or damage. Replace if necessary.
- 2Check piston with piston cup for wear or damage. Replace if necessary.
- 3Check return spring for wear or damage. Replace if necessary.
- 4Check reservoir for deformation or damage. Replace if necessary.
- 5Check dust cover for cracks, deformation or damage. Replace if necessary.
Operating Cylinder
Parts DiagramFig. fig1
| # | Part Name | Notes / Torque |
|---|---|---|
| 1 | Push rod | — |
| 2 | Dust cover | — |
| 3 | Bleeder screw | Torque: 6 - 10 N·m (0.6 - 1.0 kg-m, 4.3 - 7.2 ft-lb) |
| 4 | Operating cylinder | Rubbing surface to piston assembly — Apply rubber grease |
| 5 | Piston spring | — |
| 6 | Piston assembly | — |
| 7 | Piston cup | Apply rubber grease |
| Specification | Value |
|---|---|
| Bleeder screw torque | 6 - 10N·m |
| Bleeder screw torque | 0.6 - 1.0kg-m |
| Bleeder screw torque | 4.3 - 7.2ft-lb |
Bleeder screw torque
6 - 10N·m
Bleeder screw torque
0.6 - 1.0kg-m
Bleeder screw torque
4.3 - 7.2ft-lb
NOTE
Apply rubber grease to: operating cylinder rubbing surface to piston assembly, and piston cup.
INSPECTION
Operating Cylinder Inspection
- 1Check rubbing surface of cylinder for wear, rust or damage. Replace if necessary.
- 2Check piston with piston cup for wear or damage. Replace if necessary.
- 3Check piston spring for wear or damage. Replace if necessary.
- 4Check dust cover for cracks, deformation or damage. Replace if necessary.