SERVICE DATA AND SPECIFICATIONS (S.D.S.)
CL-12spec tableClutch pedal height differs between L.H. (left-hand drive) and R.H. (right-hand drive) models. L.H.: 186-196 mm (7.32-7.72 in), R.H.: 182-192 mm (7.17-7.56 in).
General Specifications
CLUTCH CONTROL SYSTEM
| Specification | Value |
|---|---|
| Type of clutch control | Hydraulic |
Type of clutch control
Hydraulic
CLUTCH MASTER CYLINDER
| Specification | Value |
|---|---|
| Inner diameter | 15.87 (5/8)mm (in) |
Inner diameter
15.87 (5/8)mm (in)
CLUTCH OPERATING CYLINDER
| Specification | Value |
|---|---|
| Inner diameter | 19.05 (3/4)mm (in) |
Inner diameter
19.05 (3/4)mm (in)
CLUTCH DISC
| Specification | Value |
|---|---|
| Model | 225LTD |
| Facing size (Outer dia. x inner dia. x thickness) | 225 x 150 x 3.5 (8.86 x 5.91 x 0.138)mm (in) |
| Thickness of disc assembly With loadwith 5,394 N (550 kg, 1,213 lb) | 7.6 - 8.0 (0.299 - 0.315)mm (in) |
Model
225LTD
Facing size (Outer dia. x inner dia. x thickness)
225 x 150 x 3.5 (8.86 x 5.91 x 0.138)mm (in)
Thickness of disc assembly With loadwith 5,394 N (550 kg, 1,213 lb)
7.6 - 8.0 (0.299 - 0.315)mm (in)
CLUTCH COVER
| Specification | Value |
|---|---|
| Model | C225S |
| Full load | 5,394 (550, 1,213)N (kg, lb) |
Model
C225S
Full load
5,394 (550, 1,213)N (kg, lb)
Inspection and Adjustment
CLUTCH PEDAL
CLUTCH PEDAL
Pedal height*
L.H.186 - 196 (7.32 - 7.72)
R.H.182 - 192 (7.17 - 7.56)
Pedal free play (Backlash at clevis)
L.H.1.0 - 3.0 (0.039 - 0.118)
R.H.1.0 - 3.0 (0.039 - 0.118)
NOTE
*Measured from surface of melt sheet to pedal pad
CLUTCH DISC
| Specification | Value |
|---|---|
| Model | 225LTD |
| Wear limit of facing surface to rivet head | 0.3 (0.012)mm (in) |
| Runout limit of facing | 1.0 (0.039)mm (in) |
| Distance of runout check point (from the hub center) | 107.5 (4.23)mm (in) |
| Maximum backlash of spline (at outer edge of disc) | 0.9 (0.035)mm (in) |
Model
225LTD
Wear limit of facing surface to rivet head
0.3 (0.012)mm (in)
Runout limit of facing
1.0 (0.039)mm (in)
Distance of runout check point (from the hub center)
107.5 (4.23)mm (in)
Maximum backlash of spline (at outer edge of disc)
0.9 (0.035)mm (in)
CLUTCH COVER
| Specification | Value |
|---|---|
| Model | C225S |
| Diaphragm spring height | 33.0 - 35.0 (1.299 - 1.378)mm (in) |
| Uneven limit of diaphragm spring toe height | 0.7 (0.028)mm (in) |
Model
C225S
Diaphragm spring height
33.0 - 35.0 (1.299 - 1.378)mm (in)
Uneven limit of diaphragm spring toe height
0.7 (0.028)mm (in)