BODY END — Body Rear End and Opener
BF-8parts diagramBody Rear End and Opener
IMPORTANT
Back door adjustment: Adjust at hinge-body portion for proper back door fit.
Back door lock system adjustment: Adjust lock & striker so that they are in the center. After adjustment, check back door lock operation.
Trunk lid adjustment: Adjust at hinge-trunk lid portion for proper trunk lid fit.
Trunk lid lock system adjustment: Adjust striker so that it is in the center of the lock. After adjustment, check trunk lid lock operation.
WARNING
Be careful not to scratch back door stay when installing back door. A scratched stay may cause gas leakage.
The contents of the back door stay are under pressure. Do not take apart, puncture, apply heat or allow fire near it.
IMPORTANT
Opener cable: do not attempt to bend cable using excessive force.
After installation, make sure that trunk lid/back door and fuel filler lid open smoothly.
Before removing rear bumper, remove right drafter which is secured with two upper nuts and butyl seal.
| Specification | Value |
|---|---|
| Back-door hinge fasteners (hinge-back door and hinge-body) | 21 - 26N·m (2.1 - 2.7 kg·m, 15 - 20 ft·lb) |
Back-door hinge fasteners (hinge-back door and hinge-body)
21 - 26N·m (2.1 - 2.7 kg·m, 15 - 20 ft·lb)