BODY END — Body Front End (Cont'd) — Hood lock and bumper rubber adjustment
BF-7parts diagramBody Front End (Cont'd)
Hood lock adjustment
IMPORTANT
Adjust lock so that hood primary lock meshes at a position where hood is 1 to 1.5 mm (0.039 to 0.059 in) lower than fender.
After hood lock adjustment, adjust bumper rubber.
When securing hood lock, ensure it does not tilt. Striker must be positioned at the center of hood primary lock.
After adjustment, ensure that hood primary and secondary lock operate properly.
Bumper rubber adjustment
IMPORTANT
Adjust so that hood is aligned with fender. (Bumper rubber free height is approx. 20 mm (0.79 in).)
| Specification | Value |
|---|---|
| Hood-to-fender step at primary lockHood is lower than fender. | 1 - 1.5mm (0.039 - 0.059 in) |
| Hood-lock secondary latch hooking length | More than 5mm (0.20 in) |
| Bumper rubber free height (approx.) | ≈ 20mm (0.79 in) |
Hood-to-fender step at primary lockHood is lower than fender.
1 - 1.5mm (0.039 - 0.059 in)
Hood-lock secondary latch hooking length
More than 5mm (0.20 in)
Bumper rubber free height (approx.)
≈ 20mm (0.79 in)
Hood / bumper-mount tightening torques
Hood adjustment / hinge / bumper-rubber bracket
N·m21 - 26
kg-m2.1 - 2.7
ft-lb15 - 20
Bumper assembly mounting bolts and nuts (CS102 area)
N·m13 - 16
kg-m1.3 - 1.6
ft-lb9 - 12